Antminer D3 19.3 GH/s X11 ASIC Dash Miner

Description

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: Hash rate: 19.3 GH/s (Variation of ±5% is expected)

b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).

c) Dimensions of the miner: 12.6 x5.12 x 7.5″

d) Hashing algorithm: X11 – Compatible Coins: DASH, ADZ, ARC, ATX, BOLI, BOPS, BSC, CANN, CNO, CNT, COXST, CREVA, CRM, DP, ENT, ERY, FAL, GILL, GRN, HCC, HPC, INFX, J-x11, KASH, KURT, LGBTQ, LKC, MAR, MARX, MMM, MND, MUE, OGN, ONX, OZC, PIZZA, PXI, SAND, SEV, SMC, START, TOR, TREAU, UIS-x11, VLTC, XCXT, XVP

2. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power a couple of Antminer D3. (NOT INCLUDED)

4. All PCIe connectors on a hashing board want to be connected to the PSU for the hashboard to operate. Do not connect a couple of PSU to the same hashing board!

5. Separate power supply to keep watch over board: there is one additional 6pin PCIe connector on the IO board which will have to be connected to the PSU to get power. Make sure you power on the miner only in spite of everything the PCIE connectors are connected to power supply.

6. Please make a choice the right kind address for shipping before you submit your order because, the shipping address cannot be changed after the order has been submitted. The seller does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation on account of custom formalities or other reasons.

Make sure this fits by entering your model number.
Hash rate: 19.3 GH/s (Variation of ±5% is expected)
Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp)
Hashing algorithm: X11 (Dash and lots of others)
Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power a couple of Antminer D3
All PCIe connectors on a hashing board want to be connected to the PSU for the hashboard to operate. Do not connect a couple of PSU to the same hashing board! Separate power supply to keep watch over board: there is one additional 6pin PCIe connector on the IO board which will have to be connected to the PSU to get power. Make sure you power on the miner only in spite of everything the PCIE connectors are connected to power supply